Staining concrete floors in house is practical to do. That is why many homeowners prefer this to their homes.
One of the keys to creating a stunning and satisfying stained concrete floor is its preparation.

Follow the steps in this blog for the best results. We’ll focus on properly preparing your concrete floors at home for a staining application.

Importance of Preparing the Slabs

Why is it essential to prepare the slabs? The truth is that if the surface isn’t clean and free of lippage or bumps, the stain won’t penetrate properly and can cause a blotchy result.

Stained and polished kitchen floor

Ways to Clean Concrete Floors in Your House Before Staining Cement Floors

No flooring material, including beautiful concrete, is entirely maintenance-free. Concrete foundations are fairly easy to clean compared to other flooring forms, particularly carpet, but require maintenance. The quantity of upkeep your floor will require is mainly determined by the traffic it gets. Here are the steps for easy concrete staining at home:

1. Surface Cleaning

Sweep it using a broom and then mop it with a cleaning solution to remove stubborn dirt.

Start grinding it down to ensure you have a smooth surface. You don’t need to go for an intensive grind with this; a light pass with a grinder will do.

Once the floor is clean, it’s time to fill in any cracks or holes for an even surface. Anchoring cement can be used as a one-stop shop for filling and leveling, then use a trowel to work it into these areas.

Thoroughly rinse the area after mopping and let it dry completely before any other staining process.

2. Masking the Floor Designs

Mask off any parts you don’t want to stain, such as stairs, borders, walls, or ground fixtures. This is where you can get creative, laying up designs as elaborate as you want with masking tape and butcher paper or tape and drape. If you wish to mix many colors to create a pattern, proceed with one color and then cover again for additional shades.

3. Coloring Application

Apply the color using a sprayer in two or three coats, giving each one time to dry. For fine details and cutting edges, use a brush, expert staining contractors knows how to do this. The different hues of concrete colors are suitable for mixing and matching depending on the area and your design goals.

4. Sealer Application

Apply concrete sealant last. Once the sealer has had time to set, there are a few different methods for applying it to your polished concrete floor. The most popular technique for achieving an extraordinarily smooth and glossy finish uses a sprayer and microfiber pads.

Apply two layers of sealant, allowing each to dry for no more than four hours. Finally, wait three to four days before allowing furniture placement and foot movement on your floor.

Keeping a Dallas Home Beautiful

It’s simple to maintain and clean a polished concrete floor. The best way to clean is by using a duster. You can use a soft cloth and a non-toxic cleanser to remove wet spills and stains.

Concrete may develop an uneven shine, especially in high-traffic areas, which signifies the sealer is eroding. Use a moderate floor cleanser to clean the seal, then let it dry. Apply sealant in two or three applications and let it dry. Low-traffic zones must survive more than a year, while high-traffic areas might last three months.

You can be confident that your interior decorative colored concrete floor, regardless of scale, will be unique because there are many color and design options.

Hope this blog helped you with easy concrete staining for your home.

Angie's List
Houzz
Google+ Local
Yelp
Dallas Concrete Artisans
Dallas Concrete Artisans is a proud member of the Dallas community. We are committed to create better residential and commercial properties through concrete restoration, masterful craftsmanship, and smart design.
Our Business Location
Visit Us
Scroll to Top